577 research outputs found

    TPS design for aerobraking at Earth and Mars

    Get PDF
    An investigation was made to determine the feasibility of using an aerobrake system for manned and unmanned missions to Mars, and to Earth from Mars and lunar orbits. A preliminary thermal protection system (TPS) was examined for five unmanned small nose radius, straight bi-conic vehicles and a scaled up Aeroassist Flight Experiment (AFE) vehicle aerocapturing at Mars. Analyses were also conducted for the scaled up AFE and an unmanned Sample Return Cannister (SRC) returning from Mars and aerocapturing into Earth orbit. Also analyzed were three different classes of lunar transfer vehicles (LTV's): an expendable scaled up modified Apollo Command Module (CM), a raked cone (modified AFT), and three large nose radius domed cylinders. The LTV's would be used to transport personnel and supplies between Earth and the moon in order to establish a manned base on the lunar surface. The TPS for all vehicles analyzed is shown to have an advantage over an all-propulsive velocity reduction for orbit insertion. Results indicate that TPS weight penalties of less than 28 percent can be achieved using current material technology, and slightly less than the most favorable LTV using advanced material technology

    Monte Carlo direct simulation technique user's manual

    Get PDF
    User manual for Monte Carlo direct simulation techniqu

    Satellite on-board processing for earth resources data

    Get PDF
    Results of a survey of earth resources user applications and their data requirements, earth resources multispectral scanner sensor technology, and preprocessing algorithms for correcting the sensor outputs and for data bulk reduction are presented along with a candidate data format. Computational requirements required to implement the data analysis algorithms are included along with a review of computer architectures and organizations. Computer architectures capable of handling the algorithm computational requirements are suggested and the environmental effects of an on-board processor discussed. By relating performance parameters to the system requirements of each of the user requirements the feasibility of on-board processing is determined for each user. A tradeoff analysis is performed to determine the sensitivity of results to each of the system parameters. Significant results and conclusions are discussed, and recommendations are presented

    Satellite on-board processing for earth resources data

    Get PDF
    The feasibility was investigated of an on-board earth resources data processor launched during the 1980-1990 time frame. Projected user applications were studied to define the data formats and the information extraction algorithms that the processor must execute. Based on these constraints, and the constraints imposed by the available technology, on-board processor systems were designed and their feasibility evaluated. Conclusions and recommendations are given

    Ten-year experience of more than 35,000 orofacial clefts in Africa

    Full text link
    Abstract Background Surgical correction of orofacial clefts greatly mitigates negative outcomes. However, access to reconstructive surgery is limited in developing countries. The present study reviews epidemiological data from a single charitable organization, Smile Train, with a database of surgical cases from 33 African countries from 2001–2011. Methods Demographic and clinical patient data were collected from questionnaires completed by the participating surgeons. These data were recorded in Excel, analyzed using SPSS and compared with previously reported data. Results Questionnaires were completed for 36,384 patients by 389 African surgeons. The distribution of clefts was: 34.44% clefts of the lip (CL), 58.87% clefts of the lip and palate (CLP), and 6.69% clefts of the palate only (CP). The male to female ratio was 1.46:1, and the unilateral: bilateral ratio 2.93:1, with left-sided predominance 1.69:1. Associated anomalies were found in 4.18% of patients. The most frequent surgeries included primary lip/nose repairs, unilateral (68.36%) and bilateral (11.84%). There was seasonal variation in the frequency of oral cleft births with the highest in January and lowest by December. The average age at surgery was 9.34 years and increased in countries with lower gross domestic products. The average hospital stay was 4.5 days. The reported complication rate was 1.92%. Conclusions With the exception of cleft palates, results follow trends of worldwide epidemiologic reports of 25% CL, 50% CLP, and 25% CP, 2:1 unilateral:bilateral and left:right ratios, and male predominance. Fewer than expected patients, especially females, presented with isolated cleft palates, suggesting that limitations in economic resources and cultural aesthetics of the obvious lip deformity may outweigh functional concerns and access to treatment for females. A fewer than expected associated anomalies suggests either true ethnic variation, or that more severely-affected patients are not presenting for treatment. The epidemiology of orofacial clefting in Africa has been difficult to assess due to the diversity of the continent and the considerable variation among study designs. The large sample size of the data collected provides a basis for further study of the epidemiology of orofacial clefting in Africa.http://deepblue.lib.umich.edu/bitstream/2027.42/110688/1/12887_2015_Article_328.pd

    Comparison of ORSAT and SCARAB Reentry Analysis Tools for a Generic Satellite Test Case

    Get PDF
    Reentry analysis is essential to understanding the consequences of the full life cycle of a spacecraft. Since reentry is a key factor in spacecraft development, NASA and ESA have separately developed tools to assess the survivability of objects during reentry. Criteria such as debris casualty area and impact energy are particularly important to understanding the risks posed to people on Earth. Therefore, NASA and ESA have undertaken a series of comparison studies of their respective reentry codes for verification and improvements in accuracy. The NASA Object Reentry Survival Analysis Tool (ORSAT) and the ESA Spacecraft Atmospheric Reentry and Aerothermal Breakup (SCARAB) reentry analysis tools serve as standard codes for reentry survivability assessment of satellites. These programs predict whether an object will demise during reentry and calculate the debris casualty area of objects determined to survive, establishing the reentry risk posed to the Earth's population by surviving debris. A series of test cases have been studied for comparison and the most recent uses "Testsat," a conceptual satellite composed of generic parts, defined to use numerous simple shapes and various materials for a better comparison of the predictions of these two codes. This study is an improvement on the others in this series because of increased consistency in modeling techniques and variables. The overall comparison demonstrated that the two codes arrive at similar results. Either most objects modeled resulted in close agreement between the two codes, or if the difference was significant, the variance could be explained as a case of semantics in the model definitions. This paper presents the main results of ORSAT and SCARAB for the Testsat case and discusses the sources of any discovered differences. Discussion of the results of previous comparisons is made for a summary of differences between the codes and lessons learned from this series of tests

    Note: CO2-mineral dissolution experiments using a rocking autoclave and a novel titanium reaction cell

    Get PDF
    A novel titanium reaction cell has been constructed for the study of water-rock-CO2 reactions. The reaction cell has been used within a direct-sampling rocking autoclave and offers certain advantages over traditional “flexible gold/titanium cell” approaches. The main advantage is robustness, as flexible cells are prone to rupture on depressurisation during gas-rich experiments. The reaction cell was tested in experiments during an inter-laboratory comparison study, in which mineral kinetic data were determined. The cell performed well during experiments up to 130 °C and 300 bars pressure. The data obtained were similar to those of other laboratories participating in the study, and also to previously published dat
    corecore